Right now buying a used car needs to consider many aspects. Do not get tricked you buy a car that was used collision or has other shortcomings. The first to be checked is the condition of the car body, how to look at the corners, especially the hood, rear trunk, and door pillars. The car that never had collision would not have a perfect seam, as good as a fix-great mechanic, it is difficult to match the original shape. While to check whether

Brakes are one of the most vital part in the operation of your vehicle (car for example). The existence of the brakes is very important to give a sense of security when using the car, but the functioning of the device depends on how we take care of him. If treatment is omitted, its function is almost certainly not optimal. ultimately, our salvation (and others) when driving under threat. To keep the brakes still grip is not difficult, provided we know how to tips-tricks. The first thing to note is part of disc and drum break, and check the quality of brake fluid, brake lines and brake itself. For brake fluid, usually must be replaced or cleaned after the car through 10,000 km. Note this section carefully so as not empty, and note the comparison between the front and rear (2:1). The front gets a larger portion because most often used when the car brakes. The following step is to check whether the brake is still in good condition or not. The trick, remove the wheels to lock, consider the disc break off the handle and brake with a hammer or screwdriver. When the brake is dirty, use sandpaper / brush / brush to clean it. The

As one who was driving the car, to be sure you never feel one of the most unpleasant incident that had experienced a motorist is breaking down. These events must be very frustrating, especially when you‘re pressed for time to be up somewhere soon. Plus the fact that you do not understand about the ins and outs of the machine, complete already suffering. To overcome this problem (especially for those who do not understand the car), there are short tips

When the fun driving the car sometimes difficult to compromise. Especially if the problem was located in the engine “over heat”. Two dintara cause of over-heat the radiator is leaking or the engine cooling system may not work optimally / damaged. For the second constraint of the tips mentioned there that you can do. Minimal car you can move up to the nearest garage. Tips: 1. Open up your car’s engine cover and disconnect the cable connecting the AC condenser. 2. Cable AC condenser which has been lost to you condenser connected with a cable machine. 3. When everything is installed, then you do not forget to removing the magnetic compressor. These cables are usually located not far from ac compressors. 4. After all that is done is connected, then you live following up the engine ac. Basically these tips to work with the principle of your vehicle can move back to the cooling system from the AC condenser. So that the risks when your vehicle can move towards the nearest garage, you can not enjoy the cool air conditioning during the trip. What is written above the tips are used for vehicles that use a cooling system elektromotor. And of course it